What Smart Phones And Tablets Are Compatible with measureQuick?

What Smart Phones And Tablets Are Compatible with measureQuick?

General Advice

Any Apple Device iOS from about 3 years ago and Android from 2 years ago. Once you've confirmed your device meets the requirements, see Getting Started with measureQuick to set up the app.

iPad

  • iPad 9th Gen or higher
  • iPad Pro 5th Gen or higher
  • Latest iPad minis

iPhone

iPhone 13, iPhone 13 Pro or newer

Android Tablets

Samsung Galaxy Tab S7 or tablets with similar specs, or newer devices with better specs.

Android Phones

Google Pixel 6 or newer, Samsung Galaxy S21 or newer, or other manufacturers devices with similar specs.

Manufacturer Support

Apple end-of-life Minimum Specifications

iPadOS 18 released September 16, 2024. It runs on the following models:

  • iPad Pro (M4), iPad Pro 12.9-inch (3rd gen and later), iPad Pro 11-inch
  • iPad Air (M2), iPad Air (3rd gen and later)
  • iPad (7th gen and later)
  • iPad Mini (5th gen and later)

With this iteration of iPadOS Apple dropped support for the 2nd-gen 12.9-inch iPad Pro, the 10.5-inch iPad Pro, and the 6th-gen iPad.

iPadOS 17 arrived in 2023 and was last updated in August 2024. It runs on the following models:

  • iPad Pro 12.9 (2nd gen and later)
  • iPad Pro 11
  • iPad Pro 10.5
  • iPad Air (3rd gen and later)
  • iPad (6th gen and later)
  • iPad mini (5th gen and later)

iPadOS 17 dropped support for 2016 iPad Pro 9.7-inch (A9X chip), 2015 iPad Pro 12.9-inch (1st gen) (A9X chip) and 2017 iPad (5th gen) which runs on an even slower A9 processor.

To check which smart tools and probes are compatible with measureQuick, see Supported Smart Tools & Compatibility.

    • Related Articles

    • Bluetooth Troubleshooting: Android Permissions & Probe Connectivity

      Quick Fix: Android Permissions Most Bluetooth problems on Android are caused by missing permissions. Check all three before doing anything else. Location - Settings > Location - must be ON (system-wide) measureQuick Location - Settings > Apps > ...

    • App Troubleshooting: Crashes, Errors & Cache Clearing

      App Crashes or Freezes Force-close and reopen iOS: Swipe up from the bottom (or double-tap Home), find measureQuick, swipe it up to close. Android: Open Recent Apps, swipe measureQuick away. Reopen the app. Unsaved data from the current session may ...

    • Bluetooth Troubleshooting

      A bug preventing some Android devices from detecting Seitron digital manifolds during Bluetooth scans has been fixed. Make sure you are running the latest version of measureQuick. This document provides information to help you with the Bluetooth ...

    • What do I do when the app “crashes”?

      If the airbag goes off, the phone is probably totaled, call your insurance company. If the airbag does not go off, restart the application. Apps are complex pieces of software and need to be restarted periodically to clean up temporary files. If you ...

    • Report Troubleshooting: Generation, Branding & Sharing

      Report Not Generating "Generate Reports" button is missing or grayed out You need a saved test before reports are available. Complete your measurements, then tap Save before generating a report. If you started a project but did not run a test ...