TestTracker & live data streaming

TestTracker (formerly Remote Verify) is a Premier Services feature. This article covers the new mQ Cloud released on October 27, 2026. The previous Cloud is still available at classic.measurequick.com.

TestTracker lets a service manager or lead technician see today's jobs and watch a technician's test live from cloud.measurequick.com. The technician starts a stream in the measureQuick app; anyone in the same company can watch it in the Cloud.

Video Tutorial

The video shows the earlier Cloud screens. The app steps are the same; the Cloud steps below match the new Cloud.

Starting a Live Stream

1. From the Home tab in the measureQuick HVAC app, tap the Stream icon
   

1. 
2. Tap Start Stream
   NOTE: All streams are automatically shared with users within the same company account. The Get sharable link option should only be used with users outside of the company.
3. Once the stream is started, the status will become Waiting for Viewer until someone opens the stream in mQ Cloud. When a user joins, the Status will change to Live Stream in Progress.
   
   
4. To stop the data stream, tap Stop Stream. Note: If a live viewer does not connect to the data stream, or the data is not being viewed for 15 minutes or longer the stream will automatically stop.

TestTracker in the Cloud

Open TestTracker in the sidebar. The page shows:

• Today's numbers: jobs today, the average score today, and CO alerts.
• Technician scores: each technician's average Vitals score and job count for the jobs shown.
• Live Streams: every active stream, with the workflow, device, start time and number of viewers, and a Watch button.
• Jobs: every job with its score, status (Complete, In Progress, On Hold), fault flags, report and photo icons, and progress. Search, or filter by status, assigned technician and time range. Switch between Board (a list) and Map to see job locations.

Click the refresh button at the top right to update the page. Live streams also appear on the Dashboard under Live jobs.

Watching a live stream

1. In TestTracker under Live Streams, or on the Dashboard under Live jobs, click Watch.
2. The stream opens with its LIVE status, workflow, start time, number of viewers, app version, device and progress. A banner appears if the stream goes quiet.
3. Use the tabs to choose a view. You move through the views on your own; the technician's screen does not change.
   • Gauges: refrigerant gauges, indoor and air-side dials, and readings against their targets. Switch between Standard and Detailed.
   • Grid: every reading on the stream, grouped by system, refrigerant circuit, air side, electrical and other readings.
   • System: the System View diagram, with Refrigerant, Air side and Diagnostics layers.
   • Trend: charts of readings over time.
   • Profile: the equipment profile, data plate photos, and manuals lookup.
   • Map: the job site and the technician's location.

Several people can watch the same stream at once.

Sending requests to the technician

Open the job from TestTracker or Asset Manager. The Remote control card sends a request to the technician's app: Start stream, Stop stream, Generate report, Benchmark, Request measurements or Request photo. A request reaches the app only while measureQuick is open on the technician's device.

For everything else on the job page, see Asset Manager. For a tour of the whole Cloud, see Getting Around the New mQ Cloud.