Using BluVac with mQ in Quick Tests

Using BluVac with mQ in Quick Tests

Using BluVac with mQ in Quick Tests

Accessed from within a project, an evacuation can be preformed by opening the BluVac app from within measureQuick to store the test results with the rest of the results in the project. Currently only BluVacs are supported in measureQuick.

From the quick test section, tap “Evacuation Test” and a quick test will open with a button to open the BluVac application. Complete the testing as normal. When complete, tap the record button and save the recording. (See below to view a video of how to connect reports) Tap “view” and “Send Back to MQ” to log the following:

  1. Evacuation Time
  2. Decay Time
  3. Ultimate Vacuum
  4. Final Vacuum after decay

The PDF report can be viewed and will be attached to the project when the submit button is pressed.


The BluVac PDF can be printed, attached or emailed.

How to connect a BluVac report to mQ


Updated on June 19, 2020

    • Related Articles

    • How to Connect a BluVac Gauge to measureQuick

      How to connect a BluVac gauge to measureQuick The BluVac gauge does not connect to the measureQuick app directly. We wanted to avoid redundancy between the two apps, so instead, we created a way for the BluVac reports to filter into the measureQuick ...

    • BluVac Integration with measureQuick

      BluVac Integration with measureQuick The BluVac Integration with measureQuick is accomplished through an app-to-app communication scheme. In the mQ app, if you go to the Toolbox > Data Sharing Tools > BluVac System Evacuation App and choose Activate. ...

    • Quick Start Guides

      Quick Start Guides Here are links to the most up to date guides on measureQuick as well as reference material. Links to the measureQuick Quick Start Guides (print single sided) • Start a Project v2.1 • Visual assessment and Probe Placement v2.1 • mQ ...

    • Using the Duct Leakage Screening Test in measureQuick

      Using the Duct Leakage Screening Test in measureQuick Accessing the Quick Tests Quick tests are accessed in a project in the latest software release (1.1.5 or newer, you may have to go to the app store to update to this version) to access the test, ...

    • Pairing and using your iManifold(R) System with measureQuick

      Pairing the iManifold or iConnect to mQ is very similar to pairing most other tools as shown in this article with the exception of the external wired probes and the wireless probes. The difference with the wired probes MUST be plugged into the ...