Tool Tracker (Premier Services) lets you manage your full tool inventory across your team, see tool locations on a map, and track calibration status. Access it from the Toolbox.

Adding Bluetooth® Tools

1. Prepare Your Tools:
   
   • Ensure your Bluetooth-enabled tools are turned on and within range.
   • Check that your mobile device's Bluetooth is enabled.
2. Access the Toolbox:
   
   • Open measureQuick and tap the Toolbox icon in the navigation bar.
3. Scan for Tools:
   
   • In the Toolbox, tap "Scan" or "Add Tools".
   • measureQuick will scan for nearby Bluetooth tools.
4. Select Your Tools:
   
   • As tools are detected, they will appear in a list.
   • Tap on each tool you want to connect.
5. Pairing Process:
   
   • Follow any on-screen prompts to complete the pairing process.
   • This may include entering a pairing code or confirming the connection on your tool.

Mapping Your Tools

After connecting, you'll need to map each tool to its correct function:

1. Tap on a connected tool in the Toolbox.
2. Select the appropriate measurement type (e.g., Supply Air, Return Air, Suction Pressure).
3. Repeat for each connected tool.

Note: The first time you use the probes, they will attempt to auto-map. You can adjust this if needed.

Managing Your Tools

• Viewing Connected Tools: All connected tools appear in the Toolbox with their current readings.
• Remapping Tools: Tap on any tool to change its assigned function.
• Removing Tools: To delete a tool, swipe left on the tool and tap "Delete" or "Remove".
• Checking Tool Status: The Toolbox shows battery levels and signal strength for each tool.

Troubleshooting Connections

If you're having trouble connecting a tool:

1. Ensure the tool is turned on and within range.
2. Try turning the tool off and on again.
3. Go to your device's Bluetooth settings and forget the device, then try reconnecting in measureQuick.
4. Check if the tool needs a firmware update.

Still having trouble? See Bluetooth Troubleshooting: Android Permissions for Android devices, or Probes Not Showing Up if tools are not detected during scanning.

Using App-to-App Connections

Some tools may require connection through their manufacturer's app:

1. In the Toolbox, look for an option to connect via another app.
2. Select the appropriate manufacturer's app.
3. Follow the prompts to establish the connection.

Best Practices

• Keep your tools' firmware updated for best compatibility.
• Name your tools in a way that makes them easy to identify (e.g., "Van 1 Psychrometer").
• Regularly check your connections before starting a job to ensure all tools are properly linked.

Need Help?

• Check our compatibility list to ensure your tools are supported.
• See Proper Wireless Probe Placement for where to position probes on a job.
• Contact support at support@measurequick.com for personalized assistance.
• Visit our YouTube channel for video tutorials on connecting specific tool brands.