SmartAC.com is a 24/7 HVAC monitoring system that integrates with measureQuick to provide continuous system monitoring. This guide outlines the technical steps for deployment and integration.

Required Components

1. measureQuick app (latest version)
2. SmartAC.com kit, including:
   
   • Hub
   • Comfort sensor
   • Filter sensor
   • Water sensor
3. Smartphone or tablet with internet connection
4. Customer's Wi-Fi network information

Pre-Deployment Steps

1. Ensure your measureQuick account is set up for SmartAC.com integration.
2. Verify that your Field Service Management (FSM) software (e.g., ServiceTitan) is properly integrated with measureQuick for seamless data transfer.

Deployment Process

1. Initiate Installation in measureQuick

a. Open measureQuick and select the appropriate dispatch or create a new project. b. Choose "AC Installation" or "AC Heat Pump Service" workflow. c. Select "Unlock" to access Premier features if prompted.

2. SmartAC.com Kit Registration

a. Locate the QR code on the back of the SmartAC.com box. b. In measureQuick, navigate to the SmartAC.com section and scan the QR code. c. The system will automatically populate the SmartAC.com serial number.

3. System Profiling

a. Enter detailed system information:

• Equipment make and model
• Installation date
• System type (e.g., heat pump, split system)
• Tonnage
• SEER rating
• Metering device type
• Target subcooling (if applicable)

b. Verify job site information and geotag the equipment location.

4. Sensor Deployment

a. Filter Sensor:

• Remove the pull tab to activate the battery.
• Verify blue LED flash upon activation.
• Install in the filter section of the air handler.
• Enter filter size and MERV rating in measureQuick.

b. Comfort Sensor:

• Activate battery and verify LED flash.
• Place in a central location in the conditioned space.

c. Water Sensor:

• Activate battery and verify LED flash.
• Use the riser accessory for proper positioning.
• Place in the drain pan or potential water collection area.

5. Hub Setup

a. Plug in the SmartAC.com hub near the installed sensors. b. Wait for the orange LED to start flashing, indicating it's ready for Wi-Fi connection.

6. SmartAC.com App Configuration

a. measureQuick will redirect you to the SmartAC.com app. b. Enter customer email and verify pre-populated information. c. Scan the hub's QR code again if prompted. d. Connect the hub to the customer's Wi-Fi network:

• Select the customer's network
• Enter the Wi-Fi password e. The app will confirm sensor connections (comfort, filter, water). f. Assign room locations to each sensor. g. Take a clear photo of the equipment nameplate.

7. Finalize Installation

a. Confirm successful pairing of all components. b. Return to measureQuick app. c. Verify SmartAC.com data is visible in measureQuick:

• Supply air temperature
• Return air temperature
• Sensor battery levels

Post-Deployment Steps

1. Educate the customer on the SmartAC.com app and its features.
2. Explain the notification process for both the customer and your company.
3. Update the customer's maintenance agreement to reflect the new monitoring service.

Troubleshooting

• If sensors don't connect, ensure they're within range of the hub and batteries are properly activated.
• For Wi-Fi connection issues, verify network credentials and signal strength at the hub location.
• If measureQuick doesn't recognize the SmartAC.com installation, ensure both apps are updated to the latest version.

Best Practices

1. Perform a full system analysis with measureQuick before installing SmartAC.com to ensure optimal system performance.
2. Use the geotag feature in measureQuick to precisely locate outdoor units for future service calls.
3. Regularly check SmartAC.com data through measureQuick to proactively identify system issues.

By following this technical guide, HVAC professionals can efficiently deploy the SmartAC.com system integrated with measureQuick, enabling advanced monitoring capabilities and streamlined maintenance processes.

Video Tutorial