Refrigeration FAQ's

Refrigeration FAQ's

Refrigeration FAQs

Frequently asked questions about refrigeration and measureQuick.

In the Refrigeration applications, what is meant by Refrigeration class 1-5?

Some manufacturers use class 1-5 to identify the design temperature differences of their evaporator coils. The design temperature difference dictates the humidity control.

Can mQ be used on refrigerators, freezers, ice machines and wine coolers?

Yes, you can use it under Refrigeration mode. As long as you have your wireless probes in the correct places too, it should work!

Updated on March 12, 2020

    • Related Articles

    • How to Contact Support

      How to Contact Support Do you need the answer now? We care about your experience and realize that most times when you’re looking for an answer, you need it now. But if it is an instance where you don’t need it ASAP, look around for a bit and if you ...

    • How measureQuick Calculates Superheat & Subcooling

      How measureQuick calculates superheat & subcooling Once in awhile, we get a question on superheat and subcooling calculations and why they don’t appear to agree. You will notice this difference on blended refrigerants only. So we have a blended ...

    • Introduction to Non-Invasive System Testing

      Introduction to Non-Invasive System Testing The Non-Invasive System Test (NIST™) is a method of accuracy verifying proper operation of an air conditioning or refrigeration system without the need to install the gauges or pressure transducers/probes. ...

    • Understanding the Cloud on the Application

      Understanding the Cloud on the application Wonder what all those different cloud icons mean? Here’s a little help. While you’re in a project, you can simply save your progress without closing the project by tapping the cloud in the upper right ...

    • Understanding the Cloud on the Application

      Understanding the Cloud on the application Wonder what all those different cloud icons mean? Here’s a little help. While you’re in a project, you can simply save your progress without closing the project by tapping the cloud in the upper right ...