Pairing and using your iManifold(R) System with measureQuick

Pairing and using your iManifold(R) System with measureQuick

Pairing the iManifold or iConnect to mQ is very similar to pairing most other tools as shown in this article with the exception of the external wired probes and the wireless probes.

The difference with the wired probes MUST be plugged into the correct jack on the back of the manifold or iConnect module.
  1. SLT
  2. LLT
  3. DLT
  4. ODA
It is also very important to understand that the wireless probes communicate through the iManifold or iConnect, so they must be paired together in the iManifold app before using mQ. Because of this, there is no "Probe Manager" for the iManifold products; they're all managed by the iManifold itself.

Here's a video by Jim demonstrating it:


    • Related Articles

    • Proper Wireless Probe Placement for Accurate Diagnostics in measureQuick

      Proper Wireless Probe Placement for Accurate Diagnostics in measureQuick measureQuick at its core is a fancy computer. To get the right answers out, you have to put the right information in, meaning the probe placement is critical. Note: When placing ...
    • Using the Duct Leakage Screening Test in measureQuick

      Using the Duct Leakage Screening Test in measureQuick Accessing the Quick Tests Quick tests are accessed in a project in the latest software release (1.1.5 or newer, you may have to go to the app store to update to this version) to access the test, ...
    • Introduction to Non-Invasive System Testing

      Introduction to Non-Invasive System Testing The Non-Invasive System Test (NIST™) is a method of accuracy verifying proper operation of an air conditioning or refrigeration system without the need to install the gauges or pressure transducers/probes. ...
    • measureQuick 2.5 Release Notes

      Welcome to mQ2.5! Here’s what’s new! 2.5.130 Release notes Version 2.5.130 was released Wednesday, March 20th, with the following new features: JB Climate Class wireless probes support Yellow Jacket YJACK wireless probes support View Gauge & ...
    • Pairing Yellow Jacket Probes

      The Yellow Jacket probes pair the same way as the other brands we support https://support.measurequick.com/portal/en/kb/articles/how-to-pair-bluetooth-tools with the exception of the amp clamps. When viewing the amp clamps in the Probe Manager screen ...