All Bluetooth Probes Reference

All Bluetooth Probes Reference

What You'll Learn

  • Every Bluetooth probe and smart tool compatible with measureQuick, organized by manufacturer
  • What each probe measures and which channels it feeds in the app
  • Which probes connect directly via BLE and which require a companion app (App-to-App)
  • How to quickly identify the right probe for a given measurement need

What You'll Need

  • Device: iPhone (iOS 15+) or Android phone/tablet (Android 10+) with measureQuick installed
  • Account: measureQuick account (see Creating Your measureQuick Account)
  • Smart tools: Not required to use this reference. Consult this article when selecting, purchasing, or identifying probes.
  • Time: 5-10 minutes to review; bookmark for field reference

Connection Methods

Before reviewing the probe tables, understand the two primary ways probes communicate with measureQuick:

  • Direct BLE - The probe pairs directly with measureQuick via Bluetooth Low Energy. Data streams in real time. Most probes use this method.
  • App-to-App - The probe connects to the manufacturer's companion app first. That app shares data with measureQuick. Both apps must remain open on your device during testing.

A third method, QR Code, applies only to the sunset Bacharach Fyrite combustion analyzer and is not covered here.

Fieldpiece

Fieldpiece probes use the JobLink wireless system with a rated range of 1,000+ feet, the longest BLE range of any compatible manufacturer. All connect via Direct BLE.

JobLink Probes

Model Measurement mQ Channels Key Specs
JL3PC Pipe clamp temperature Suction line temp, liquid line temp, vapor line temp Range: -51 to 257F, Accuracy: +/-1.1F, 3-second response, copper pipe clamp
JL3PR Refrigerant pressure High-side pressure, low-side pressure Auto calibration, 45-degree angled fitting, elevation compensated
JL3RH Psychrometer (humidity, wet bulb, dew point) Return air wet bulb, supply air wet bulb, return/supply RH Range: -40 to 250F / 0-100% RH, 60-second response
JL3KM2 Manometer (static/differential pressure) Total external static pressure, supply static, return static Dual port, high-accuracy differential measurement

Shared JobLink specs: 1,000+ ft wireless range, 150 hours battery life (AAA), IP55 water/dust resistance, operating temperature -4 to 122F.

SMAN Digital Manifolds

Model Ports Measures mQ Channels Notes
SM380V 3-port High/low pressure, saturation temps, vacuum Condenser pressure, evaporator pressure, vacuum (microns) Built-in vacuum gauge (50-9,999 microns)
SM482V 4-port High/low pressure, saturation temps, vacuum Condenser pressure, evaporator pressure, vacuum (microns) 4-port, recommended best-in-class manifold

SMAN manifolds appear as a single device in measureQuick. Wired temperature probes plugged into the manifold's thermocouple ports report through the manifold connection, not as separate Bluetooth devices. Wireless JobLink probes (JL3PC, JL3PR) are separate BLE devices.

Other Fieldpiece Tools

Model Measurement mQ Channels Connection Notes
Fieldpiece Multimeter Amps, volts, capacitance, frequency, ohms, power, temperature Electrical channels (amps, volts, watts) Direct BLE Single device, multiple measurement types
Fieldpiece Wireless Scale Refrigerant weight Charge weight Direct BLE Sunset - 110 lb capacity, no longer in active support

[Visual Reference] A Fieldpiece JobLink wireless probe kit includes individual probes (JL3PC pipe clamp, JL3PR psychrometer, JL3RH humidity probe) alongside an SMAN digital manifold. Each JobLink probe is a small, standalone Bluetooth device with a model number printed on the housing. The SMAN manifold is the larger unit with pressure ports, a display screen, and thermocouple jacks. Wired probes plug into the manifold; wireless JobLink probes pair independently via BLE.

Testo

Testo probes connect via Direct BLE with a rated range of 350 feet. The Testo Smart App is required for firmware updates but must be closed during measureQuick use.

Digital Manifolds

Model Ports Measures mQ Channels Notes
550i 2-way valve block High/low pressure, saturation temps Condenser pressure, evaporator pressure 60 refrigerant profiles
550s 2-way valve block High/low pressure, saturation temps Condenser pressure, evaporator pressure Updated firmware, extended probe support
557s 4-way valve block High/low pressure, saturation temps Condenser pressure, evaporator pressure 4-way valve, additional ports for recovery/charging
560i Automatic High/low pressure, saturation temps Condenser pressure, evaporator pressure Automatic charging, integrated valve control

Wired NTC temperature clamps plugged into the manifold report as part of the manifold. Wireless 115i pipe clamps are separate BLE devices.

Smart Probes

Model Measurement mQ Channels Key Specs
115i Pipe clamp temperature Suction line temp, liquid line temp, vapor line temp Range: -40 to 302F, Accuracy: +/-2.3F, 350 ft range, 150 hr battery
549i Refrigerant pressure, saturation temp High-side pressure, low-side pressure Range: -15 to 870 psi, Accuracy: +/-0.5% FS, 350 ft range
605i Humidity, wet bulb, dew point Return air wet bulb, supply air wet bulb, return/supply RH Range: -4 to 140F / 0-100% RH, Accuracy: +/-0.9F / +/-3% RH
510i Differential pressure Total external static pressure 350 ft range, 150 hr battery

Testo Capture Hood

Model Measurement mQ Channels Connection Notes
420 Airflow (CFM), humidity, static pressure Airflow, RH, static pressure Direct BLE 24x24 hood, range 25-2,300 CFM, under 6.4 lbs

TEC (The Energy Conservatory)

Model Measurement mQ Channels Connection Notes
TrueFlow Grid (TFG-1) Total system airflow (CFM) Airflow App-to-App (via TEC TrueFlow App) Replaces filter, 8 adapter sizes (14x20 through 25x25), range 300-2,500 CFM
DG-1000 Differential pressure Static pressure, airflow (with TrueFlow Grid) Direct BLE Dual-channel digital gauge, range +/-10 inWC, 0.1 Pa resolution

The TrueFlow Grid requires the TEC TrueFlow App as an intermediary. The DG-1000 connects directly to measureQuick via BLE and is also used as the pressure gauge for TrueFlow Grid measurements.

UEI

Model Measurement mQ Channels Connection Notes
DL599 Power Clamp Meter Amps, volts, watts, power factor, kVA Electrical channels Direct BLE True RMS, 600A, 3-phase rotation, CAT IV 600V
HAC High Accuracy Clamp Amps, volts Electrical channels Direct BLE True RMS, 200A, +/-1.5% accuracy, CAT IV 600V
HUB6/HUB8 (WPP1 probes) Refrigerant pressure High-side/low-side pressure Direct BLE Wireless pressure probes in the HUB system
HUB6/HUB8 (WPC2 clamps) Pipe temperature Suction/liquid line temp Direct BLE Pipe clamp probes, +/-0.5F accuracy
HUB6/HUB8 (WHP1) Humidity, wet bulb Return/supply air RH and wet bulb Direct BLE Wireless hygrometers
DPM Wireless Manometer Static/differential pressure Total external static pressure Direct BLE Range +/-80 inWC, dual port, magnetic mount
SPMKIT Static Pressure Kit Static pressure Supply static, return static Direct BLE Includes 2 manometers, 2 probes, fittings, tubing
COA2 CO Monitor Ambient carbon monoxide CO (ppm) Direct BLE Personal CO safety monitor, range 1-999 ppm, alarm at 35 ppm

Sensorcon

Model Measurement mQ Channels Connection Notes
Inspector CO Meter Ambient carbon monoxide CO (ppm) Direct BLE Industrial-grade CO detection, audible/visual alarms

The Sensorcon Inspector is a personal safety device. It streams ambient CO readings to measureQuick for documentation in gas furnace and combustion workflows.

AccuTools

Model Measurement mQ Channels Connection Notes
BluVac+ Professional (A10702) Vacuum level (microns) Evacuation vacuum App-to-App (via BluVac App) Range 0-25,000 microns, 0.1 micron resolution, 300 hr battery, 500 PSI overpressure protection
BluVac+ Micro Wireless (A10730) Vacuum level (microns) Evacuation vacuum App-to-App (via BluVac App) Range 0-25,000 microns, 1 micron resolution, 100 hr battery, compact form factor

Both BluVac models connect to the AccuTools BluVac app via Bluetooth. The BluVac app then shares evacuation data with measureQuick through App-to-App integration. Both apps must be open on the same device. The BluVac does not connect directly to measureQuick.

Other Compatible Manufacturers

NAVAC

Model Measurement mQ Channels Connection
NX1 / NX4 Digital Manifolds High/low pressure, saturation temps Condenser/evaporator pressure Direct BLE
NAVAC Smart Probes (temp) Pipe temperature Suction/liquid line temp Direct BLE
NAVAC Smart Probes (humidity) Humidity Return/supply RH Direct BLE

100+ refrigerant profiles including A2L types. 4 operating modes: manifold, leak test, evacuation, decay test.

Yellow Jacket

Model Measurement mQ Channels Connection
TITANMAX / YJACK PRESS Refrigerant pressure High-side/low-side pressure Direct BLE
YJACK TEMP Pipe temperature Suction/liquid line temp Direct BLE
YJACK DEW Humidity, wet bulb Return/supply air RH and wet bulb Direct BLE
YJACK MANO Differential pressure Static pressure Direct BLE

Yellow Jacket probes have a rated range of 400 feet. Important limitations: The YJACK AMP clamp meter connects to measureQuick but does not transmit amperage data into the app. The YJACK VAC vacuum probe is not compatible with measureQuick.

JB Industries

Model Measurement mQ Channels Connection
CLIMATE CLASS Manifold High/low pressure, saturation temps Condenser/evaporator pressure Direct BLE
CLIMATE CLASS Temp Clamps Pipe temperature Suction/liquid line temp Direct BLE
CLIMATE CLASS Psychrometer Humidity, wet bulb Return/supply air RH and wet bulb Direct BLE

Forged aluminum manifold with color-coded over-molded clamps and standalone psychrometer.

Seitron

Model Measurement mQ Channels Connection
Be Cool Evo M4S High/low pressure, saturation temps, vacuum Condenser/evaporator pressure, evacuation Direct BLE

4-way manifold with 150+ refrigerant profiles, 3x K-type thermocouple inputs, 72+ hour battery, Bluetooth 5.0.

Parker Sporlan

Model Measurement mQ Channels Connection
SMART Probes Pressure, temperature High/low pressure, suction/liquid temp Direct BLE

CPS

Model Measurement mQ Channels Connection
Static Pressure Meter Differential pressure Total external static pressure Direct BLE
VOLT-100 Clamp Power Meter Amps, volts, watts, THD Electrical channels Direct BLE
Wireless Scale Refrigerant weight Charge weight Direct BLE
EasyHood & Airflow Meter Airflow (CFM), humidity Airflow, RH Direct BLE

CPS Static Pressure Meter: dual port, range +/-75 inWC, resolution 0.004 inWC, 500+ hour battery.

Redfish

Model Measurement mQ Channels Connection
iDVM550 Power Clamp Meter Amps, volts, power factor Electrical channels Direct BLE
iDVM510 Digital Multimeter Volts, ohms, capacitance Electrical channels Direct BLE

Sauermann

Model Measurement mQ Channels Connection
Combustion Analyzers O2, CO, CO2, flue temp, draft Combustion channels Direct BLE

O2 (0-25%), CO (0-8,000 ppm), flue temperature (-4 to 2,282F), draft (-80 to +80 inH2O). Optional NOx sensor. Field-replaceable sensors. Sauermann is the only actively supported combustion analyzer for measureQuick.

iManifold

Model Measurement mQ Channels Connection
iManifold / iConnect Pressure, temperature Condenser/evaporator pressure, line temps App-to-App (via iManifold App)

Quick Reference: App-to-App Tools

Three probe systems require their manufacturer's companion app rather than connecting directly to measureQuick:

Tool Companion App Why App-to-App
TEC TrueFlow Grid TEC TrueFlow App Airflow calculation requires proprietary calibration data in the TEC app
AccuTools BluVac BluVac App Evacuation workflow, decay testing, and calibration managed in the BluVac app
iManifold / iConnect iManifold App Pressure/temperature data processed through iManifold's interface

For all App-to-App tools, both the manufacturer's app and measureQuick must be open simultaneously on the same device. If the companion app is closed or backgrounded, data stops flowing to measureQuick.

Tips & Common Issues

Choosing between a manifold and individual wireless probes

A digital manifold (Fieldpiece SMAN, Testo 557s, NAVAC NX4) measures both high-side and low-side pressures simultaneously through a single Bluetooth connection. Individual wireless pressure probes (Fieldpiece JL3PR, Testo 549i, Yellow Jacket YJACK PRESS) each measure one pressure at a time and require separate connections. Manifolds are simpler for refrigerant diagnostics. Individual probes offer more placement flexibility.

Probe does not appear in the scan list

Confirm the probe is powered on and not connected to another app or device. BLE devices connect to one app at a time. Force-close any manufacturer companion apps (Fieldpiece, Testo Smart App, BluVac) before scanning in measureQuick. Power-cycle the probe if it still does not appear.

Mixing manufacturers in one test

measureQuick supports simultaneous connections from multiple manufacturers. You can run a Fieldpiece SMAN manifold for pressures, Testo 115i clamps for temperatures, a UEi DL599 for electrical, and a TEC TrueFlow Grid for airflow, all in the same test. The app handles channel assignment regardless of probe brand.

Maximum simultaneous connections

measureQuick can maintain 15+ simultaneous BLE connections. In practice, a comprehensive commissioning test uses 9-12 probes. Bluetooth stability depends on your phone's BLE chipset and ambient wireless interference.

Reference Material

Download: Tests and Probes Quick Reference (PDF)

Related Articles

Prerequisites (complete these first):

Follow-up articles (next steps after this one):

Related in the same domain:

Need Help?

If you cannot find a probe in this reference or have questions about compatibility:

  • Check the Related Articles section above
  • Contact measureQuick support: support@measurequick.com

    • Related Articles

    • Bluetooth Pairing Basics

      What You'll Learn How Bluetooth Low Energy (BLE) works with measureQuick and why it differs from classic Bluetooth The three connection types measureQuick supports: Direct Connect, App-to-App, and QR Code How to pair a BLE smart tool from inside the ...

    • Heat Pump Heating Mode Probes

      What You'll Learn How the refrigerant circuit reverses in heating mode, swapping evaporator and condenser roles Where to place suction line, liquid line, and vapor line temperature clamps in heating mode vs. cooling mode Why mQ needs an additional ...

    • Bluetooth Troubleshooting

      What You'll Learn How to diagnose and fix the most common Bluetooth connectivity failures in measureQuick The differences between iOS and Android BLE behavior that cause connection problems How to clear your BLE cache and reset tool pairing lists How ...

    • Fieldpiece Probe Pairing

      What You'll Learn How to pair Fieldpiece JobLink probes (JL3PC, JL3PR, JL3RH, JL3KM2) with measureQuick How to connect Fieldpiece SMAN digital manifolds (SM380V, SM482V) and their attached probes How to pair the Fieldpiece Multimeter for electrical ...

    • Probe Manager

      What You'll Learn What the Probe Manager screen displays and how to navigate it How to read connection status, signal strength, and battery level for each tool How channel mapping works: which probe feeds which measurement slot How to reassign ...