Download and install the measureQuick® HVAC on an Apple or Android Device. (mQ does not currently support Windows based software)
Search: measureQuick HVAC
Data can come into mQ via two methods, data streaming and app sharing. Data streaming is the preferred method as it provides the best user experience, but it is not always possible for all tools. Click here for a full list of supported tools.
Measurements pulled off wireless tools.
High Pressure: High pressure, low pressure
Line Temperatures: Suction, liquid, discharge and vapor (heat pumps)
Air Temperatures and humidity’s: return, supply and outdoor
Low pressure: Gas inlet, manifold, draft, CAZ, TESP, RESP, SESP
Combustion: Stack temp, combustion air temp, oxygen, excess air, CO, COaf, Carbon Dioxide, gross efficiency, net efficiency, dew point.
Electrical: Volts, amps, watts, power factor, incoming voltage, low voltage, flame rod micro amps, thermocouple, polarity, combustion mfd, combustion blower amps, indoor fan mfd, indoor fan power factor, indoor fan watts.
Logging-In & Setup
Enter the information on the login screen. This will give you access to the appropriate projects based on what email is provided (For example: If your work uses measureQuick Virtuoso, use your work email in order to be linked to your works projects). Accept the User License agreement by scrolling to the end and tapping “accept.”
After logging in, look for the icon in Figure 1.2. Tap “Check permissions”
If the user is enrolled in any utility programs or work program, they will find them here.